Dr. Smith Flexible Denture Flask (2Pcs)
Flexible denture flask used in dental injection system
Features
- Brand : DR Smith
- Model : Dr. Smith Flexible Denture Flask (2Pcs)
- Dr. Smith Flexible Denture Flask (2Pcs) : Dr. Smith Flexible Denture Flask (2Pcs)
Brand New
Secure Payment
100% Genuine Products
Manufacturer Warranty
Dr. Smith Flexible Denture Flask (2Pcs) - 1 Unit
$ 187.00
The Dentist Shop Assurance
Description
Features:-
DR Smith Flexible Denture Flasks are specially designed for dental laboratory and usually used for dental injection system machine. The denture flask is very easy to handle and can be used with Manual and Automatic Denture Injection Machine to make dentures. Internal structure is designed to save plaster.Two-piece structure (upper part and lower part) allows easy operation for flasking.
Direction to Use:-
- Apply petrolatum to the inside of the Metal Flask, and place the Flask on the Leveler.
- Cover the deflasking hole with two pieces of moist paper towel, or with wax.
- Position the “pin half” of the Space Maintainer in the injection cavity.
- POUR #1: Mix LabStone, and embed the cast and wax-up in the Flask, placing the cast as close as possible to the back of the Flask.
- Remove all excess LabStone.
- Then, fit the top half of the Space Maintainer securely on the bottom half.
- Use wax sticks to build the injection sprues.
- For lower full and partial dentures,occlusal splints and nightguards, attach the sprue to both lingual extensions, as well as in the midline.
- Apply separator to all gypsum surfaces,and place the top half of the Flask on the bottom half, ensuring complete,intimate metal contact and closure of the halves. Secure metal Flask Brackets to the Flask and tighten.
- POUR #2: Place the Flask on the Leveler , mix LabStone, and pour it into the Flask,only up to the occlusal incisal surface of the teeth. As the LabStone begins to set, wipe away excess stone to keep the occlusal incisal surface clear.
- Apply separator (such as sodium silicate or another alginate or petrolatum separator) over pour #2 once set. (A separator plate may be used as an alternative.)
- POUR #3: Pour additional LabStone on top of separator, filling the Flask. Remove excess, level,
and allow stone to set completely. - Loosen the bolts and remove the metal Flask Brackets.
Key Specifications:-
- Material: Aluminium
- Weight: 2.5kg
- Size: 12 x 10 x 12 cm
Packaging:-
- Box of 2Pcs
Product Specification
Brand
DR Smith
Model
Dr. Smith Flexible Denture Flask (2Pcs)
Dr. Smith Flexible Denture Flask (2Pcs)
Dr. Smith Flexible Denture Flask (2Pcs)
Reviews (0)
Be first to write the review
Units sold in last 7 days
